Watlow RMA PLUS RMAP-2A Series, User Manual

Page: 62 / 75

Version 1.0 PN: 2042-8198
Page 62 of 75 DN: 10-32813
Volume
Volume is a new object. It is used to obtain information about each of the three volumes. This
information is only updated upon request by way of the Refresh member.
IMPORTANT: Use caution with the Format member. All data on this volume will be lost upon execution
of this command!
Volume 102 (0x66), Instances 1-3
Member ID Member Name Data Type Access NV Min Max Default Comments / Description
1 0x01 Name STRING R 1: "sd:"
2: "nor:"
3: "ram:" Volume name
2 0x02 Label STRING RW F 0 11 1: "MICRO SD"
2: "NOR FLASH"
3: "RAM DISK" Volume label
3
0x03
File System STRING R File system
4 0x04 Used Space UINT32 R Used space (bytes)
5
0x05
Free Space
UINT32
R Free space (bytes)
6 0x06 Capacity UINT32 R Capacity (bytes)
7 0x07 Percent Used FLOAT R Used space (%)
8 0x08 Percent Free FLOAT R Free space (%)
11 0x0B State ENUM16 R 2211: Disconnected
1782: Start
1662: Ready
1638: Stop
2212: Stopped
12 0x0C Error UINT16 R Last error
16 0x10 Refresh ENUM16 RW 59 59: No
106: Yes
17 0x11 Start / Stop ENUM16 RW 59 59: No
106: Yes
18 0x12 Format ENUM16 RW 59 59: No
106: Yes
Optic Sensing
This feature is only available if the model number is RMAP- 8 AXX-XXXX.
Optic sensing objects are used to configure and report status of the inputs in an adjacent fiber optic
module.
Optic Sensing 210 (0xD2), Instances 1-4
Member ID Member Name Data Type Access NV Min Max Default Comments / Description
1 0x01 Temperature FLOAT R
2 0x02 Status UINT16 R 0 7 1: Probe connected, no fault conditions
2: Probe disconnected, Probe recovery mode
3: Probe connected, Max LED current
4: Probe connected, low light level
6: No signal, possible LED Failure
7: LED current above warning alarm
3 0x03 LED Current (mA) FLOAT R 0 20
4 0x04 LED Counts UINT16 R
5 0x05 Decay Time (µs) FLOAT R
8 0x08 Probe Type UINT8 RW F 1 4 1 Class variable
9 0x09 PCB Temperature FLOAT R
10 0x0A LED Warning Point (mA) FLOAT RW F 0 20 15 Class variable