Watlow RMA PLUS RMAP-2A Series, User Manual

Page: 45 / 75

Version 1.0 PN: 2042-8198
Page 45 of 75 DN: 10-32813
6. Create the file defined by the newly-created HTTPs key referencing data points you wish to display
in the new web page. Notice the format is very similar to the other gateway files. Compared to
Modbus®, the
“ Token ” column replaces the “Register” column. All other elements are the same.
Tokens are user-defined strings. The remainder of the record elements are bus dependent as
before.
Token Bus Segment Zone Class Instance Member Refresh Count
Z1_DEV1_HardwareId 1 0 1 1 1 1 0 DEV 1 Hardware ID
Z1_DEV1_DateCode 1 0 1 1 1 8 0 DEV 1 Date Code
Z1_DEV1_ModelNumber 1 0 1 1 1 9 0 DEV 1 Model Number
Z1_DEV1_DeviceName 1 0 1 1 1 11 0 DEV 1 Device Name
Z1_DEV1_FirmwareVersion 1 0 1 1 1 17 0 DEV 1 Firmware Version
Z1_DEV1_SerialNumber 1 0 1 1 1 32 0 DEV 1 Serial Number
Z1_VAR1_Type 1 0 1 2 1 1 0 VAR 1 Type
Z1_VAR1_Digital 1 0 1 2 1 2 0 VAR 1 Digital
Z1_VAR1_Analog 1 0 1 2 1 3 0 VAR 1 Analog
Z1_DSP1_DisplayUnits 1 0 1 3 1 5 0 DSP 1 Display Units
Z1_TST1_Tick 1 0 1 16 1 6 0 TST 1 Tick
Z1_TST1_EventLog 1 0 1 16 1 8 0 TST 1 Event Log
Z1_AST1_Member1 1 0 1 19 1 1 0 AST 1 Member 1
Figure 40 - Example: Custom HTTPs table
7. Create a new HTML page “sd: \Https\ Zone01.html” using the user-defined tokens above to display
information about the high-speed Watbus device at Zone 1. Use the default HTML page
“Index.html” as a guide. Open the web page from the Https directory to validate the design without
dynamic token replacement.
Figure 41 - Example: Zone01.html source
8. Save and close all files on the MICRO SD and NOR FLASH drives. Eject (stop / unmount) both drives.
9. Reset the RMA PLUS.
10. Open a web browser and navigate to the RMA PLUS using the IP address or host name i.e.
http://rma-<Serial Number>/Zone01.html or http://192.168.0.100/Zone01.html. Observe the new
HTML page with live data inserted for Zone 1.