Watlow Electric MINICHEF 2000 Fast Start Manual Download Page 22

Declaration of Conformity

WATLOW CONTROLS
1241 Bundy Boulevard
Winona, Minnesota  55987 USA

Declares that the following product:

English

Designation:

MINICHEF 2000

Model Number(s):

F2(H or U)(A or C)-(1, 2, 3 or 4)(1, 2 or 3)(1, 2 or 3)
1-(0 or 1)(0 or 1)(Any two letters or  numbers)

Classification:

Electronic incorporated Class III temperature
controller, Type 2C action, for use in light industrial

RatedVoltage:

24V~ (VAC)

Rated Frequency:

50/60 Hz

Maximum Input Power:

15 Watts

Meets the essential requirements of the following European Union Directive(s)
using the relevant section(s) of the normalized standards and related documents
shown:

89/336/EEC   Electromagnetic Compatibility Directive

EN 50082-1:

1995 EMC Generic immunity standard, Part 1:  Residential,

commercial and light industry

EN 61000-4-2:

1995 Electrostatic discharge

EN 61000-4-4:

1995 Electrical fast transients

EN 61000-4-5:

1995 Surge immunity

EN 61000-4-6:

1996 Conducted immunity

EN 61000-4-8:

1993 Power frequency magnetic field immunity

EN 61000-4-11: 1994 Voltage dips, short interruptions and voltage variations

immunity

ENV 50140:

1994 Radiated immunity

ENV 50204:

1995 Cellular phone

EN 50081-1:

1994 EMC Generic emission standard, Part 1:  Residential,

commercial and light industry

EN 55011:

1991 Limits and methods of measurement of radio disturbance

characteristics of industrial, scientific and medical radio-
frequency equipment (Class B)

73/23/EEC   Low-Voltage Directive

EN 60730-1:

1993 Automatic electrical controls for household and similar

use, Part 1: General requirements

EN 60730-2-9:

1995 Automatic electrical controls for household and similar use,

Part 2; Particular requirementsSection 2.9 Temperature
sensing controls

97

MINICHEF 2000

WMC2-XCEM

Déclare que le produit suivant :

Français

Désignation :

MINICHEF 2000

Numéro(s) de modèle(s) :

F2 (H ou U) (A ou C)-(1, 2, 3 ou 4) (1, 2 ou 3)(1, 2 ou
3) 1-(0 ou 1) (0 ou 1) (deux lettres ou chiffres
quelconques)

Classification :

Contrôleur de température Classe III électronique,
action type 2C, pour les utilisations industrielles
légères

Tension nominale :

24 V ~ (alternatif)

Fréquence nominale :

50/60 Hz

Alimentation
d’entrée maximale :

15 W

Conforme aux exigences de la (ou des) directive(s) suivante(s) de l’Union
Européenne figurant aux sections correspondantes des normes et documents
associés ci-dessous :

89/336/EEC Directive de compatibilité électromagnétique

EN 50082-1 :

1995 Norme générique sur l’immunité, Partie 1 :

Environnement résidentiel, commercial et industriel
léger

EN 61000-4-2 : 1995 Décharge électrostatique
EN 61000-4-4 : 1995 Transitoires rapides électriques
EN 61000-4-5 : 1995 Immunité aux surtensions
EN 61000-4-6 : 1996 Immunité conduite
EN 61000-4-8 : 1993 Immunité aux champs magnétiques de fréquence

industrielle

EN 61000-4-11 : 1994 Immunité aux chutes de tension, brèves interruptions et

variations de tension

ENV 50140 :

1994 Immunité rayonnée

ENV 50204 :

1995 Téléphone cellulaire

EN 50081-1 :

1994 Norme générique sur les émissions, Partie 1 :

Environnement résidentiel,commercial et industriel
léger

EN 55011 :

1991 Limites et méthodes de mesure des caractéristiques des

perturbations radioélectriques des appareils industriels,
scientifiques et médicaux (Classe B)

73/23EEC Directive sur les basses tensions

EN 60730-1 :

1993 Commandes électriques automatiques à usage

domestique et similaire, Partie 1: Exigences générales

EN 60730-2-9 : 1995 Commandes électriques automatiques à usage domestique

et similaire, Partie 2: Exigences particulières, Section 2.9
Commandes de détection de la température

Erklärt, daß das folgende Produkt:

Deutsch

Beschreibung:

MINICHEF 2000

Modellnummer(n):

F2 (H oder U)(A oder C)-(1, 2, 3 oder 4)(1, 2 oder 3)(1, 2
oder 3) 1-(0 oder 1)(0 oder 1)(2 beliebige Buchstaben oder
Zahlen)

Klassifikation:

Eingebautes elektronisches Temperaturregelsystem der
Klasse III, Typ 2C Aktion, für den Einsatz in der
Leichtindustrieumwelt

Nennspannung:

24 V~ (V Wechselstrom)

Nennfrequenz:

50/60 Hz

Maximaler
Leistungsverbrauch:

15 W

Erfüllt die wichtigsten Normen der folgenden Anweisung(en) der Europäischen
Union unter Verwendung des wichtigsten Abschnitts bzw. der wichtigsten
Abschnitte der normalisierten Spezifikationen und der untenstehenden
einschlägigen Dokumente:

89/336/EEC EWG Elektromagnetische Verträglichkeit

EN 50082-2:

1995 EMC-Rahmennorm für Störsicherheit, Teil 1:

Wohngegenden, Handelsverkehr und Leichtindustrie

EN 61000-4-2:

1995 Elektrostatische Entladung

EN 61000-4-4:

1995 Elektrische schnelle Stöße

EN 61000-4-5:

1995 Spannungsstoßimmunität

EN 61000-4-6:

1996 Störimmunität

EN 61000-4-8:

1993 Magnetische Felder

EN 61000-4-11: 1994 Immunität gegen Spannungsgefälle, kurze Unterbrechungen

und Spannungsabweichungen

ENV 50140:

1994 Strahlungsimmunität

ENV 50204:

1995 Mobiltelefon

EN 50081-2:

1994 EMC-Rahmennorm für Emissionen, Teil 1:

Wohngegenden, Handelsverkehr und Leichtindustrie

EN 55011:

1991 Beschränkungen und Methoden der Messung von

Funkstörungsmerkmalen industrieller, wissenschaftlicher
und medizinischer Hochfrequenzgeräte (Klasse B)

72/23/EEC EWG

Niederspannungsrichtlinie

EN 60730-1:

1993 Automatische elektrische Regelsysteme für den

Haushalt und ähnlichen Einsatz, Teil 1: Allgemeine
Richtlinien

EN 60730-2-9:

1995 Automatische elektrische Regelsysteme für den Haushalt

und ähnlichen Einsatz, Teil 2: Spezifische Richtlinien
Abschnitt 2.9, Temperaturregelsysteme

Declara que el producto siguiente:

Español

Designación:

MINICHEF 2000

Números de modelo:

F2 (H o U)(A o C)-(1, 2, 3 ó 4)(1, 2 ó 3)(1, 2 ó 3) 1-(0
ó 1)(0 ó 1)(Cualquier combinación de dos letras o
números)

Clasificación:

Control de temperatura electrónico incorporado,
Clase III, acción tipo 2C, para uso en aplicaciones de
industria ligera

Tensión nominal:

24 V ~ (Vca)

Frecuencia nominal:

50/60 Hz

Potencia de
entrada máxima:

15 vatios

Cumple con los requisitos esenciales de las siguientes Directivas de la Unión
Europea, usando las secciones pertinentes de las reglas normalizadas y los
documentos relacionados que se muestran:

89/336/EEC - Directiva de Compatibilidad Electromagnética

EN 50082-1:

1995 Norma de inmunidad genérica del EMC, Parte 1:

Ambiente residencial, comercial e industria ligera

EN 61000-4-2:

1995 Descarga electrostática

EN 61000-4-4:

1995 Perturbaciones transitorias eléctricas rápidas

EN 61000-4-5:

1995 Sobretensión

EN 61000-4-6:

1996 Inmunidad conducida

EN 61000-4-8:

1993 Campos magnéticos

EN 61000-4-11: 1994 Caídas de tensión, interrupciones breves y variaciones de

tensión

ENV 50140:

1994 Inmunidad radiada

ENV 50204:

1995 Teléfono portátil

EN 50081-1:

1994 Norma de emisión genérica del EMC, Parte 1: Ambiente

residencial, comercial e industria ligera

EN 55011:

1991 Límites y métodos de medición de características de

perturbaciones de radio correspondientes a equipos de
radiofrecuencia industriales, científicos y médicos (Clase B)

73/23/EEC Directiva de Baja Tensión

EN 60730-1:

1993 Controles eléctricos automáticos para

electrodomésticos y aparatos de uso similar, Parte 1:
Requerimientos generales

EN 60730-2-9:

1995 Controles eléctricos automáticos para electrodomésticos y

aparatos de uso similar, Parte 2: Requerimientos
particulares Sección 2.9, Controles para detección de
temperatura

Erwin D. Lowell

Winona, Minnesota, USA

Name of Authorized Representative

Place of Issue

General Manager

March, 1997

Title of Authorized Representative

Date of Issue

________________________________________
Signature of Authorized Representative

(1031)

Summary of Contents for MINICHEF 2000
























Reviews: