©
“WATEX” Ltd., Reg. Nr. 40003712811, Ganibu dambis 27 k-5, Riga, LV-1005; Contact information: tel. +371 67381989, e-mail:
[email protected], www.watex.eu
7
2.3.4.
Rinse cycle
To the consumers rinsing is required to remove excess reagent from the
filter tank to the sewer. In the filter tank, water flows from the top to the
bottom and then through the collector pipe up and away to the sewer.
The flow rate is regulated by the flushing seal (DLFC) inserted in the
sewer connection bend. The mode lasts for 4 minutes (factory setting).
2.3.5.
Fill cycle
In this cycle, the reagent tank is filled with treated water to dissolve the
Salt for the next recovery of filter material. The cycle lasts about 6-10
minutes. Filling of the reagent tank is stopped as soon as the specified
time has elapsed or when the float in the reagent tank closes because the
specified water level is reached. The filling time can be changed.
