background image

13

5. Installation of the battery

Important

!

 Please charge your batteries before use.

 Danger!

Danger to life from electric shock

• 

Avoid touching the battery terminals.

• 

Never undertake repair work on the battery yourself.

• 

Never touch any defective components

• 

Prevent any external forces from working on the battery 
and the cables.

• 

If you detect any defect, shut down your system and the 
battery immediately

 Caution!

Damage to the battery and your system can result from incor-
rect installation. Please read the instructions carefully.

• 

Always make sure to turn the battery off during installation 
using the main switch.

• 

Make sure to always first connect the red positive cable to 

the red positive terminal then connect the black negative 
cable to the black negative terminal.

• 

When disconnecting the battery make sure to first discon

-

nect the black negative terminal before disconnecting the 
red positive terminal.

• 

Never transpose the polarities!

5.1 Connecting multiple batteries in parallel

 Danger!

Never connect the batteries in series! Fire and damage to the 
battery and your system may result.

• 

Make sure to never connect multiple batteries in series.

• 

Never series connect the battery with any other third party 
batteries.

 Advice!

• 

Up to 8 batteries can be connected in parallel. 

• 

For systems containing a WaterWorld drive train or con-
troller a gateway is required to be able to use the data 
communication functions.

Important

!

 it is very important the batteries are all at 

the same voltage before connecting them in par-
allel. Please check the voltage difference between 
the batteries is below 0.50 Volts. If not please charge 
or discharge the batteries to equal voltage.

Important

!

 Check your system for short circuit by 

measuring the resistance of the system before 
connecting your batteries. The resistance should be 
>100 Ohm.

Summary of Contents for 48-6500

























Reviews: