Date of installation :
Contact of your heating technician or your after-sales service.
This appliance is marked with this symbol. This means that electrical and electronic products shall not be mixed with general household waste.
European Community countries(*), Norway, Iceland and Liechtenstein should have a dedicated collection system for these products.
Do not try to dismantle the system yourself as this could have harmful effects on your health and on the environment.
The dismantling and treatment of refrigerant, oil and other parts must be done by a qualified installer in accordance with relevant local and national regulations.
This appliance must be treated at a specialized treatment facility for re-use, recycling and other forms of recovery and shall not be disposed of in the municipal waste stream.
Please contact the installer or local authority for more information.
* subject to the national law of each member state
Subject to modifications without notice. Non contractual documen
t.
Complies with :
- Low voltage directive 2006/95/EC, under standard EN 60335-1.
- Electromagnetic compatibility Diretive 2004/108/EC,
- Directive 2006/42/EC Machinery,
- Directive for pressurised equipment 97/23/EC.
This appliance also conforms to:
- Regulation 842/2006 of the european parliament on certain fluorinated greenhouse gases.
- The standards relating to the product and the testing methods used: Air-conditioners, refrigeration units and heat pumps with
compressor driven by electric motor for heating and refrigeration EN 14511-1, 14511-2, 14511-3, and 14511-4.
- To standard XP ENV 12102: Air-conditioners, heat pumps and dehumidifiers with compressor driven by electric motor. Measurement
of airborne noise. Determination of acoustic power level.
8 Instructions for the user
Explain to the user how his installation operates, in
particular the functions of the room thermostat and the
programs accessible to him from the user interface.
Emphasise that a heated floor has significant inertia and
that therefore any adjustments must be made progressively.
Also explain to the user how to check the filling of the
heating circuit.
The frost protection works in all modes of operation and
has priority over other functions (provided that the heat
pump's electrical power supply is not interrupted).
"
Warning ! In winter, in case of power failure, the
frost protection is no longer assured
The water in the tank of the hydraulic module can freeze
and cause damage.
