www.watersnake.com.au
41
NAV SENSOR OPERATION
INSTRUCTIONS
INDICATOR LIGHTS:
• WHITE LIGHT
– FAST FLASHING --- STARTING
• GREEN LIGHT
– SLOW FLASHING --- NORMAL OPERATION
• GREEN LIGHT
– FAST FLASHING --- EXCESSIVE TILT ANGLE
• BLUE LIGHT
– SLOW FLASHING --- MAGNETOMETER CALIBRATION
• RED LIGHT
– SLOW FLASHING --- COMMUNICATION INTERRUPTION
• RED LIGHT
– FAST FLASHING --- SENSOR DISTURBED OR DAMAGED
1. DEPLOYMENT:
Ensure that the helix wire is not wrapped around the motor
shaft or twisted when lowering into the water. Turn on the trolling motor and
the heading sensor will be operational.
2. UNTWISTING FUNCTION:
If the helix wire rotates more than 360 ° in the
same direction when using the course-fi x, heading-fi x, automatic navigation
and anchor mode, the heading sensor will initiate an untwisting operation.
During this operation, the motor will temporarily stop and untwist. The
electric motor resumes operation upon completion.
3. JOG FUNCTION:
When the trolling motor is in anchor mode, the user can
press the acceleration (forwards), deceleration (backwards), turn left (left),
and turn right (right) buttons on the remote control to operate and direct the
jog function. The four jog directions act as coordinates relative to the
current boat direction. With each press, the trolling motor moves in 1-metre
increments. The user can press the same direction continuously to
accumulate a distance of up to 10 metres.