Watersnake Geo-Spot 80LB Bow Mount Motor Manual ( Ver.1)
32
• The upper LED is the unit’s Status Light. Its variable colour display signals
important states of your Watersnake GPS.
•
Yellow Status Light:
When unit is turned on, Status Light glows YELLOW
as unit searches for GPS signals. Superior GPS results occur outdoors, away
from tall buildings, bridges etc.
•
Green Status Light:
When unit establishes a GPS connection, usually within
a few seconds, status LED FLASHES GREEN, THEN TURNS SOLID GREEN.
Unit can be operated by the optional foot pedal only (when cable is connected)
at this time.
•
Flashing Red Status Light:
Motor is in stowed position and will not
activate for safety reasons.
• Power up Remote Control by holding
down Red Key 3 for two seconds,
then release and the screen
illuminates. Motor unit should
respond with
“shave-and-a-haircut” pairing
signal. Status light GREEN.
Hold on! Just a few more things...
INITIAL POWER-UP
( CONTINUED )
Red Key