©Copyright Watershed Innovations. All rights reserved.
HydraPump Documentation Rev 2.0
OUTLET CONNECTIONS
On the outlet of this pump there are two types of connections. The first connection is
a ¾” garden hose (GHT) connection and the second is a 1” NPT standard connection.
See figure below:
For improved outlet flow larger hoses or adapters can be attached. The GHT
connection can be cut off for installations requiring the 1” NPT connector. The NPT
threads can also be removed and a hose clamped to the remaining connector.
Finally, the entire hose adapter can be unscrewed and a 1½” pipe or hose can be
directly attached to the pump outlet. The 1½” G type has threads very similar to
NPT thread type. When attaching directly to this please use plumber’s tape when
attaching NPT threaded connectors for a better seal.
Note:
When removing the larger connections from the adapter be careful not to
damage the remaining threads.
OUTLET AND ELECTRICAL CONNECTIONS
