©Copyright Watershed Innovations. All rights reserved.
HydraPump Documentation Rev 2.0
Make sure your work area where you intend to use the pump is clear of clutter and
is well lit. Never operate a submersible pump in a pool when people are in the pool.
The pump is designed to pump water and has only been tested for that purpose. The
pump can be used with clean and dirty water but the cleaner the water the better
the pump will operate. Lastly, please note that the pump will only pump water down
to a level of approximately 1”.
INSTRUCTIONS PERTAINING TO THE RISK OF FIRE, ELECTRIC SHOCK OR
INJURY TO PERSONS. SAVE THESE INSTRUCTIONS.
WARNING – When using electrical pumps, basic precautions should always be
followed, including the following:
1.
Read all instructions before using the pump.
2.
To reduce the risk of injury or improper operation, close supervision and
thorough setup verification is recommended for safe pump operation.
3.
Do not put fingers or hands into a water pump inlet our outlet when
operating.
4.
Unplug the power before attempting to move or service the pump.
5.
Do not let the electrical connection come in contact with water.
6.
For proper grounding instructions see the ELECTRICAL CONNECTION
portion of this manual.
7.
If you are unsure of any of these instructions please contact a professional for
assistance.
SITE PREPARATION
IMPORTANT SAFETY INSTRUCTIONS
