Waters Network Systems MS1008-2G-4POE/PSX1008-2G-4PoE User’s Manual Page 71
Enable State
– PoE is
enabled
by default. You can check this box to disable the
PoE function to the port.
Power Limit From
– Choose the power limit method.
o
Classification: The system will limit the power supply to the powered device
in accordance with the related class.
o
Management: You can assign the power limit manually.
Legacy
– Used to support legacy power devices.
Priority
– Used to choose the priority of power supply.
Power Limit (<15400) mW
- While
Power Limit From
is in
Management
mode, you
can enter the power limit value (under 15.4 Watts).
Mode
- Displays the operating mode of the port.
Current (mA)
- Displays the operating current of the port.
Voltage (V)
-
Displays the operating voltage of the port.
Power (mW)
-
Displays the power consumption of the port.
Determined Class
– Displays the power limit class.
Click
Apply
to apply changes.
Figure 5.44 – PoE Settings
5.31 Factory Default Settings
You can return the factory default settings by choosing
Factory Default
from the
Main
Menu
.
