Waters Network Systems MS1008-2G-4POE/PSX1008-2G-4PoE User’s Manual Page 48
Figure 5.26 – VLAN Configuration Screen
5. The VLANs will be displayed.
6. Use the
Delete
button to remove VLANs.
7. Use the
Edit
button to modify existing VLANs.
5.22.3 802.1q VLAN
The IEEE 802.1q specification covers tagged-based. Therefore, it is possible to create
a VLAN across devices from different switch venders. IEEE 802.1Q VLAN uses a
technique to insert a “tag” into the Ethernet frames. The tag contains a VLAN Identifier
(VID) that indicates the VLAN numbers.
From this menu, you can create a tag-based VLAN, and enable or disable the Generic
Attribute Registration Protocol (
GVRP
) protocol. There are 256 VLAN groups available
for configuration. Once 802.1q is enabled, all the ports on the switch belong to default
VLAN, VID is 1. The default VLAN cannot be deleted.
Each member port of an 802.1 VLAN port is configured as an
Access
,
Trunk
, or
Hybrid
Link
. Frames on an
Access Link
carry no VLAN identification. Conversely, frames
