Waters Network Systems
User’s Manual
Page 44
GSM-2108/GSM-1008SFP
5.9 Mirror
Configuration
Function name:
Mirror Configuration
Function description:
Mirror Configuration is used to monitor the traffic of the network. For example, if Port A and Port B
are
Monitoring Port and Monitored Port respectively, the traffic received by Port B will be copied to
Port A for monitoring.
Note:
When configuring the mirror function, it is recommended to avoid setting a port to be a
sniffer port and an aggregated port at the same time.
Parameter description:
Mode:
Used for the activation or de-activation of Port Mirror function. Default is
disable
.
Monitoring Port:
Set up the port for monitoring. Valid port is Port 1~8 and default is Port 1.
Monitored Port:
Set up the port for being monitored. Select the check box (
;
)
beside the port number. Valid
ports are Port 1~8.
Figure 5.15 - Mirror
5.10 Bandwidth
Management
Function name:
Bandwidth Management
Function description:
Bandwidth Management function is used to set up the limit of Ingress and Egress bandwidth for each
port.
