9
assembly
5) Installing The Pedals
Important:
Each pedal is marked
with either an “R” (right) or an
“L” (left) on the pedal shaft.
Installing the pedal on the wrong
side of the bike may damage the
pedals and/or the crank arms.
An easy way to know if you are
attaching the pedals properly is to
always thread the pedals towards
the front of the bike. Pedals are
designed this way so they don’t
loosen during use. Be careful to
align the treads properly to avoid
damage.
Using the 15mm open end wrench,
tighten the pedals firmly.
6) Installing The Water Bottle Cage
The water bottle screws are already
attached to the frame. Simply
remove them with a 4mm Allen key
and reinstall them with a cage.
