E
N
G
LI
S
H
7
Powering the Unit
Plug the cord into an electrical outlet. If the outlet is
controlled by a wall switch, be sure it is turned on.
Preparing the Reservoir
Remove the reservoir, and fill with lukewarm water.
Replace the reservoir over the base and
press
down firmly
.
GETTING STARTED
Inserting and Removing Tips
Insert tip into the center of
the Water Flosser handle,
pressing down firmly until
the tip clicks into place. The
colored ring will be flush with
the top of the handle if the tip
is correctly locked into place.
To remove tip from the handle
push the tip eject button on
the handle.
Prime Unit (First
Time Use Only)
Set pressure control dial
on base to high (pressure
setting No.3), point the handle and tip into sink. Turn
power on until water flows from the tip. Turn unit OFF.
1
2
3
I
O
Fill
Replace
Tip
eject
button
NO
gap
I
1
2
3
O
ON
High
Water
ON