26 | 41
Assembling the Impeller Shaft
11
12
13
14
Use the illustrations and instructions to assemble
the impeller shaft.
11 Use an arbor press to install the wear rings
and impellers onto the shaft in the reverse
order you removed them. Insert the key into
the keyway before installing the first impeller.
12 Install the retaining ring onto the shaft.
13 Install the gasket, packing housing, and
packing rings onto the shaft.
Refer to:
"Installing and Tightening the
14 Install the gland halves onto the packing
housing studs, then secure them with the
hardware that you removed earlier.
Refer to:
Summary of Contents for CP-4
