Waterous CP-4, Overhaul Instructions

Page: 25 / 41

25 | 41
Safety Introduction Disassembly Assembly
Assembling the Impeller Shaft
8
9 10
Use the illustrations and instructions to assemble
the impeller shaft.
7 Install the gland halves, packing rings,
packing housing, and gasket onto the shaft,
then secure them with the hardware that you
removed earlier.
Refer to:
"Installing and Tightening the
Packing" on page 27.
8 Use an arbor press to install the wear rings
and impellers onto the shaft in the reverse
order you removed them. Insert the key into
the keyway before installing the first impeller.
9 Install the retaining ring onto the shaft.
10 Install the interstage seal onto the shaft.
7