background image

|

 28

Safety

Introduction

Product Overview

Operation

Maintenance

Use this document to install and operate your Waterous equipment. Understand 

the following conditions before continuing with the document:

• 

The instructions may refer to options or equipment that you may not have 

purchased with your system.

• 

The illustrations in this document are intended to convey concepts. Do not 

use the illustrations to determine physical attributes, placement, or 

proportion.

• 

Understand that your application may require additional steps, that are not 

described in the illustrations or instructions, to perform the installation.

• 

The equipment described in this document is intended to be installed by a 

person or persons with the necessary skills and knowledge to perform the 

installation.

• 

The equipment described in this document is intended to be operated by a 

person or persons with the basic knowledge of operating similar equipment.

• 

The information in this document is subject to change without notice.

This document is divided into the following sections:

Safety

This section describes general precautions and alert symbols that are in this 

document.

Introduction

This section is an overview of the document.

Product Overview

This section describes the components that make up the system.

Operation

This section describes the equipment operation.

Maintenance

This section describes maintenance procedures.

Using this Document

Use the guidelines below when viewing this document.

Viewing the Document Electronically

•  View this document in landscape orientation.
•  Use the table of contents to navigate directly to that section.
•  Text 

with this appearance

 is linked to a reference.

Printing the Document

•  The document is viewed the best when printed in color.
•  The 

print on both sides

 and 

flip on long edge

 features can provide the 

best results.

•  Use a 3-ring binder to store the document.

Additional Documentation

Additional documentation is available through the MyWaterous login at 

Waterousco.com

. Use your serial number to gain access to the service parts 

list associated with your system. Dimensional drawings are available through 

the Waterous Service department.

Summary of Contents for CM Series





























Reviews: