Watermill ANHPC60DLV Installation Instructions Manual Download Page 11

Watermill Products Ltd Guarantee Registration Card

Product serial number

Name

Address

Post Code

Telephone number

E-mail

Date of purchase

Product type

Purchased from

Installed by

A COPY OF THE ORIGINAL PURCHASE INVOICE MUST BE ATTACHED

WATERMILL PRODUCTS LTD GUARANTEE JANUARY 2004

Watermill Products Ltd. guarantee the parts and workmanship of this product for a period of

two years

from the date of initial purchase, provided that:

The product is installed and operated in accordance with our instructions and has not
been damaged or abused.

The guarantee registration card is completed and returned within ten days of purchase
accompanied by a copy of the original invoice (proof of purchase). We will acknowledge
receipt of the guarantee registration card within ten days. 

It is this guarantee

acknowledgement that acts as your 

two year 

guarantee

and must be kept in a safe

place and produced in the event of a claim under the terms of this guarantee. If this
acknowledgement cannot be produced, the guarantee reverts to two years from date of
manufacture.

The information on the guarantee registration card is purely for the use of Watermill Products
Ltd. in connection with the guarantee of the product. The information will not be divulged to
third parties or used by Watermill for any other marketing activities.

The guarantee is limited to product repair or replacement only.

This guarantee does not affect your statutory rights.

Summary of Contents for ANHPC60DLV













Reviews: