SAFETY PRECAUTIONS
Basic safety precautions should be followed, including the following:
DANGER!
If incorrectly installed, operated or maintained, this product can cause death or
severe injury.
Those who install, operate, or maintain this product should be trained in its proper use,
warned of its dangers, and should read the entire manual before attempting to install, operate, or
maintain this product.
WARNING!
Unit is to be used for its intended purpose as described in this manual, and
untrained individuals who use this manual assume the risk of any resulting property damage or
personal injury.
WARNING!
HOT WATER. Unit produces Hot Water up to 185
o
F.
Water above 125
o
F can cause
severe burns or scalding. Keep unauthorized people and children away from the unit to avoid
accidental dispensing of hot water. Children should not use without supervision.
DANGER!
ELECTRICAL SHOCK HAZARD
.
Always unplug from power supply prior to servicing
equipment to prevent electrical shock.
WARNING!
This system to be used for water only and is not intended for use where water is
microbiologically unsafe or with water of unknown quality without adequate disinfection before or
after the system.
The system is designed for the supplemental bactericidal treatment of either
treated and disinfected public drinking water, or other drinking water, which has been tested and
deemed acceptable for human consumption by the state or local health agency having jurisdiction.
The system is designed to reduce normally occurring non-pathogenic or nuisance microorganisms
only. System is not intended for treatment of contaminated water.
WARNING!
Dispenser Could Tip or Fall causing serious injury.
Always install unit on a firm, flat,
and level surface and secure the
WL400
to the base cabinet with the screw provided to lock the
components together. Never place heavy items on top of unit and never climb, stand, or hang on unit
or storage cabinet to prevent injury and damage.
CAUTION!
INDOOR USE ONLY
.
Do not install outdoors or where unit is in direct sunlight. Do not
install where ambient temperature goes below 50F or above 97F. Avoid high humidity and moisture.
Product life and performance will be impacted and warranty could be voided.
WL400
Operating, Installation, and Service Manual Page 6 - Revision: 5-29-2015
