WL380
Manual
Page 53 ‐ Revision: 2‐5‐2018
5.
Allow descaling solution to remain in the Hot Tank for 15 minutes (length of time may vary
depending on water conditions).
6.
Place a pitcher, catch basin or other container under the faucet of the
WL380
Water Treatment
System.
7.
Flush the Hot Tank until water runs clear.
8.
Once clear Water dispenses from the faucet the Hot Tank has been descaled. Always ensure the
WL380
Water Treatment System
is performing to the customer’s satisfaction.
WARNING!
HOT WATER. HOT WATER. Unit produces Hot Water in excess of 80
o
C (175
o
F).
Water above 52
o
C (125
o
F) can cause severe burns or scalding. Keep unauthorized people and
children away from the unit to avoid accidental dispensing of hot water.
CAUTION
!
MUST
REPLACE HOT TANK 3‐5 YEARS DEPENDING ON USAGE
. The Hot Tank and its
controls must be replaced a minimum of every three to five years to ensure efficient and
dependable operation.
WARNING!
REINSTALL ALL PANELS AND COVERS.
Always reinstall all Panels, Protective Covers,
and Fasteners after servicing equipment. Failure to do so could result in severe personal injury
and will void the certifications and warranty of the equipment
.
For additional information and updates visit
http://techportal.waterlogic.com
Contact Waterlogic for assistance or help finding an authorized service representative.
