background image

20

21

Waterlogic 2000IT Technical Manual - Issue B, December 2013

Technical Specifications 

and Warranties

SAFETy

Subject to the standard terms and conditions of sale (a copy of which has been 

provided to you), neither Waterlogic International Limited (“Waterlogic”), nor any 

affiliated companies shall be liable for any damage which could affect, directly or 

indirectly, any person or property.

Please be aware that any warranties accompanying the sale of our products will 

be invalidated by any of the following:

• Incorrect installation

 

• Incorrect use of the WL 2000IT

• Unsuitable electrical and water supply

 

• Major short-coming of maintenance

 

• Technical interventions or alterations of an unauthorised nature

 

• Adoption and use of unapproved spare parts

 

• Engagement of untrained personnel

Waterlogic has a policy of constant and continual improvement and therefore 

reserves the right to change specifications without prior notice, other than in the 

case of significant changes.

Description

WL 2000IT 

FSHC

WL 2000IT 

FSC

WL 2000IT 

MHC

WL 2000IT 

MC

Machine Size

345W*367D*1030H

Water Connection 

1/4" Hose

Machine Weight 

29kg 

27kg

27kg

25kg

Power Supply

230Volt / 50Hz

Cold Tank Capacity 

4 Litre

4 Litre

2 Litre

2 Litre

Hot Tank Capacity

1.5 Litre

N/A

1.5 lItre

N/A

UV Lamp 

8W

Heater

800W

N/A

800W

N/A

Refrigeration Gas 

R134a 

65g

65g

40g

40g

Cold Water Temp.

5 - 8°C

Hot Water Temp.

85 - 87°C

N/A

85 - 87°C

N/A

Refrigeration Gas 

R134a 

WL2 FW HC

WL2 FW C

WL2 FW MHC

WL2 FW MC

Water Connection 

1/4”  

Hose

1/4”  

Hose

1/4”  

Hose

1/4”  

Hose

Recommended 

Water Pressure Bar 

(Megapascal)

3.0 (0.3)

3.0 (0.3)

3.0 (0.3)

3.0 (0.3)

Minimum Water 

Pressure Bar 

(Megapascal)

2.5 (0.25)

2.5 (0.25)

2.5 (0.25)

2.5 (0.25)

Maximum Water 

Pressure Bar 

(Megapascal)

3.5 (0.35)

3.5 (0.35)

3.5 (0.35)

3.5 (0.35)

Minimum Incoming 

Flow Rate 
(litres per minute) 

1lpm

1lpm

1lpm

1lpm

Summary of Contents for WL2000IT




















Reviews: