16
17
Waterlogic 2 Firewall Technical Manual - Issue B, May 2014
DISPENSING YOUR CHOICE OF WATER IS VERY SIMPLE,
AS FOLLOWS:
1
. Place your cup centrally in the dispensing area
2
. Select the type of water you wish to be dispensed and press the corresponding
button and then press the main dispense button.
3
. Keep the main dispense button depressed until your cup has reached the desired
level, and then release the button.
The option buttons are very simple to identify. The different options are indicated
below.
There will be a 2 second delay from the time that the button is pressed to the water
being dispensed.
Operating Instructions
HOT WATER CAUTION
• Always place cup / mug in the centre of the drip tray.
• Always use a ceramic cup or a cup suitable for use with
hot water.
• Do not hold cup or place hands in dispensing area
whilst dispensing water.
• Do not dispense water in a stop start style of vending
• (Hold the button continuously until cup is full).
• Never try to fill more than one vessel at a time.
HOT OPTION
EXTRA HOT OPTION
COLD OPTION
AMBIENT OPTION
COLD WATER
Push Main button, LED shows green, it dispenses cold water.
AMBIENT WATER
Push Ambient button LED shows red, Push main button
it dispenses ambient water.
HOT WATER
Push hot water button LED shows red, Push Main button,
it dispenses hot water
Note: Default mode is cold water. If you have a cold only machine you will
only have available the main button.
Button 1:
select hot water
Button 2:
select cold
water
Button 3:
select ambient
water
Main Dispense Button:
to dispense water from
selection
