background image

22

23

Waterlogic 100 Technical Manual - Issue B, September 2011

Main PCB Schematic Diagram

Hot and Cold

End of Life

Non Eu Countries

At the end of this product’s life, please ensure that it is disposed of in an environmentally 

friendly manner which is in line with your Country requirements/guidelines.

WEEE (EU ONLy)

Please be aware that our products are covered by the Waste Electrical and Electronic 

(WEEE) directive (2002/96/EC). The symbol shown above denotes that the product 

should not be disposed of with general/household waste. Please contact your supplier/

service agent who will arrange for the collection and disposal of this product.

ROHS

All Waterlogic machines comply with EC Directive (2002/95/EC) on the Restriction 

of the Use of Certain Hazardous Substances in Electrical and Electrical Equipment 

(RoHS)

.

BIOCOTE® (ANTI-MICROBIAL SOLUTION)

For your added protection this product incorporates BioCote® antimicrobial technology. 

Silver, in the form of silver ions, is the active ingredient utilised in BioCote®. This silver 

technology is manufactured into the surface of our products, giving them built-in 

sustainable antimicrobial protection. 

BioCote’s silver technology has been tested by an independent laboratory to show its 

ability to inhibit the growth of bacteria, mould and fungi by up to 99.9% over a 24 hour 

period and for the duration of the machine life.

FREQUENTLy ASKED QUESTIONS ABOUT BIOCOTE®:

Why use BioCote®?

 

BioCote® will help reduce the risk of cross-contamination. You 

may not want to think about it, but every surface in the working environment is a 

potential breeding ground for Bacteria.

How is it applied? 

BioCote® is applied via an additive into the manufacturing process 

and will, therefore, be present throughout the moulded or painted parts. 

How long will BioCote® last?

 

BioCote® will last for the usual life expectancy of your 

water dispenser. It will not wear or wash out with use or cleaning.

What bacteria is BioCote® effective against?

 

BioCote® is effective against most 

common bacteria, moulds and fungi.

Please note:

 

BioCote® is an additional line of defence to protect between cleaning routines, it is 

not a replacement for your normal cleaning and sanitisation processes.

DANGER HIGH VOLTAGES PRESENT ON THIS PCB

CARE MUST BE TAKEN WHEN LIVE TESTING

Summary of Contents for WL100

















Reviews: