10
ogrammer/timer
Setting and using the oven pr
Selecting manual operation mode
After your appliance is connected to your mains supply for the
first time, the numbers on the timer display will flash. Before
de, press the manual operation
ntrol panel.
time,
uttons. After a few seconds the time
display and you will be able to use your oven.
minder can be used with the defrost oven
function. None of the other timer modes will work with the
ion.
manufacturing process, you should select the fan oven
function and set the thermostat to its maximum temperature
o
It is perfectly normal for a smell to be produced during this
o
You should make sure that any windows in the room are left
o
It is advisable for you not to remain in the room whilst the
o
You should leave the oven on maximum setting for 30 – 40
n be cleaned with
you can select a cooking function or set a temperature, you
must set the appliance into manual operation mode.
o
To select manual operation mo
button (6) on the co
Setting the time of day
After setting your oven for manual operation, you should also
set the time of day.
o
After pressing the manual operation button (6), use the minus
button (7) and plus button (8) to adjust the time that appears
in the display. After getting the display to the correct
release the minus and plus b
will fix in the
The oven timer
o
Only the minute
defrost funct
Before first use
o
To remove any residue from the oven that may have been left
from the
setting.
process.
open during this process.
burning off process is taking place.
minutes.
o
After the oven cavity has cooled, it should the
warm soapy water, using either a sponge or soft cloth. No
abrasive cleaners should be used.
