12
Resetting the UV Power Source:
The Lamp Life Days (lamp change reminder timer for models prior to February
2011) is reset by disconnecting the UV power source from the AC power supply,
waiting for 15 seconds and then reconnecting the AC power supply with the push
button depressed till screen displays “rSEt” followed by a short audible beep, the
number “365” shows on the screen indicating that the reset was successful. (For
models prior to February 2011 a three seconds beep indicates the successful
power source reset)
SYSTEM REPLACEMENT PARTS
EXCELIGHT System Replacement UV Lamps
Standard 4-pin, 9000 rated hours
Excelight EL411A UV Lamp, 20W/450mm
EL411L
Excelight EL720A UV Lamp, 32W/645mm
EL720L
Excelight EL1129A UV Lamp, 39W/845mm
EL1129L
EXCELIGHT Quartz Sleeves
DOE, silicone o-rings included
Excelight EL411A Quartz Sleeve, 535mm
EL411Q
Excelight EL720A Quartz Sleeve, 665mm
EL720Q
Excelight EL1129A Quartz Sleeve, 890mm
EL1129Q
EXCELIGHT Ballasts
115V/60hz, grounded plug, CSA Approved
Excelight Ballast, 420mV, 110V/60hz
EL411B
Excelight Ballast, 420mV, 110V/60hz, w/ Solenoid Output
EL411BS
Other EXCELIGHT Replacement Parts
Excelight Sleeve Cap
EL411C
Mounting Clip
WP-25
Sleeve o-ring kit
EL411RK
