INSTALLATION INSTRUCTIONS / USER MANUAL
4
Waterguard® Smart Stop is a wireless system for stopping water leaks. It has a central unit that works
together with wireless sensors and the wireless valve control.
All wireless components must be connected to the wireless central unit/control panel.
The unit has a function for delayed water stop. By activating DELAY, the water will be closed after 4 hours.
The wireless valve control has a 230V AC 10A socket for dishwashers etc. In case of a leak the valve control
will interrupt the power to this socket.*
* NB! THIS SOCKET IS NOT DESIGNED FOR CONNECTING WATER HEATERS.
Ref. NEK 400 - Norsk Elektroteknisk Komite (NEK)
The unit has a 1.5 meter cable with a 3-poled contact that is connected to the solenoid valve.
When two valves are used, install the split cable with the original fastening screw for the solenoid valve
contact on the valve control that is being switched over to the split cable contact. The enclosed long screw
is used to fasten the valve control contact on the split cable male contact.
.
About the system
