ALARMS
Hydrochlor ST includes alarm signals to indicate potential problems associated with its
functionality and to protect the control unit/electrolytic cell. The chlorine production
LEDs will blink/lit or change the colour to indicate the correspondent situation.
• Low Chlorine Production Level LED blinking:
Salt level is below the minimum
allowed, please add salt to pool. Consult your pool professional how to increase the
salt level. This condition may affect the longevity of the cell and void its warranty.
• High Chlorine Production Level LED blinking:
Salt level is moderately above
the maximum operational level. It needs to be reduced below the maximum
recommended. Consult your pool professional how to reduce the salt level. This
condition may affect the longevity of the cell and void its warranty.
• Max Chlorine Production Level LED Amber:
Salt level is too high. The control unit will
stop the chlorine production until it’s reduced below the maximum recommended.
Consult your pool professional how to reduce the salt level.
• No Water Flow:
The flow sensor is not detecting water flowing through the cell
housing. Control Unit will stop chlorine production and power to pool pump. Please
refer to trouble shooting guide or consult your pool professional.
WATER CHEMISTRY
Salt Level
The Hydrochlor ST chlorinators must operate between the salt level ranges listed below.
• MINIMUM = 4000 TDS • OPTIMUM = 5500 TDS • MAXIMUM = 6000 TDS
Testing kits are available from the local pool professional and should be used to
accurately check the salt level in the pool water.
MAX
HIGH
MED
LOW
MIN
PUMP ONLY
CHLORINE
PRODUCTION
PRESSING CHLORINE PRODUCTION
CONTROL BUTTON WILL CYCLE
THROUGH THE CHLORINE
PRODUCTION LEVEL AND PUMP
ONLY FUNCTION