Backwash only
Backwash only
NA
NA
NA
15 ppm
NA
NA
7
NA
6.3
27
Filter Specifications
When calling the HelpLine, please have this guide and the serial number available.
From 8 am to 5 pm EST, call 1-800-437-8993. Your serial number may be found on top
of your valve assembly (See figures 2-3.)
80ºF
120ºF
120ºF
10.5 X 21” I.D. 10.5 X 21” I.D. 10.5 X 21” I.D.
7 gpm/15 7 gpm/15 6 gpm/15
9 9
9
5.0 3.0 5.0
30 / 120 30 / 120 30 / 120
5 5 5
4 Button 4 Button 4 Button
43.5 7 7
66 21 35
1-14 1-4 1 or 2
5 lbs. NA
NA
30.75” 30.75” 30.75”
14.75” X 18.75” 14.75” X 18.75” 14.75” X 18.75”
12VAC, 1 phase60 Hz 12VAC, 1 phase60 Hz 12VAC, 1 phase60 Hz
3/4 ” MPT 3/4” MPT 3/4” MPT
89 lbs 75 lbs 125 lbs
Maximum compensated hardness (grains)
Maximum ferrous iron reduction
Minimum pH
Media type and amounts
Salt usage (lbs.) / Capacity
Maximum water temperature
Mineral tank size
Peak flow rate / psi drop
Pressure drop @ service flow rate of 4 gpm
Maximum flow rate to drain during regeneration (backwash gpm)
Water Pressure (minimum-maximum psi)
Minimum water volume required (gpm)
Controller type
Regeneration/Backwash time (minutes)
Water used per regeneration (gallons)
Frequency of regeneration (days)
Potassium Permanganate Storage
Height (in.)
Footprint (in.)
Electrical Rating
Plumbing Connections
Shipping Weight - Approximate (lbs.)
MODEL #
97WB-IF
97WB-CF
97WB-AF
Calcite/Corosex
.7 cu. ft.
Carbon
.7 cu. ft.
Greensand
.7 cu. ft.
2.8 oz. Potassium
Permanganate per regeneration
Note:
The iron filter operates in the same manner as the WaterBoss Softeners, but with manganese greensand in place of the super
fine mesh media. The filter uses a potassium permanganate (KMnO4) solution for regeneration instead of salt regenerant. In serv-
ice, the filter media aids in oxidizing the iron, manganese and/or hydrogen sulfide to a solid particle, trapping it in the filter bed.
Install before your water conditioner.
WaterBoss Model 97 WB-IF Iron Filter automatically reduces iron, Hydrogen Sulfide and
iron bacteria.
Install before your water conditioner.
WaterBoss Model 97 WB-CF Carbon Filter with the activated carbon filtering bed, chlorine
taste and odor are automatically reduced.
Note:
This filter can be installed after water conditioner in special situations. Call HelpLine for specific applications.
Install before your water conditioner.
WaterBoss Model 97 WB-AF Acid Neutralizing Filter automatically adjusts low pH water.
This will increase the water hardness by 2-4 grains.