background image

WaterTech Industries Residential 

REIONATOR

®

LIMITED LIFETIME WARRANTY

 

 

             

Applicable to 

REIONATOR

®

 Models:

 

  

Classic Series      RC32-TM, RC40-TM, RC48-TM, RC64-TM, RC80-TM 

 

 

 

Platinum Series   RP32-TM, RP40-TM, RP48-TM, RP64-TM, RP80-TM

 

 

 

Fusion Series       RF32-TM, RF40-TM, RF48-TM

WaterTech Industries (WTI) hereby warrants said equipment, only to the original purchaser at the original installation location.

THIS  WARRANTY  PERIOD  BEGINS  at  the  time  of  initial  installation  and  use.  The  warranty  becomes  valid  upon  registration  of  the 

equipment.

GENERAL PARAMETERS — This warranty applies only to systems installed on USA OR CANADIAN residential, municipal (city water) 

water supplies that meet US Environmental Protection Agency MCL standards (or similar).  REIONATOR

®

 products installed outside these 

parameters, will have the Standard Product Warranty rather than the Limited Lifetime Warranty applied – see website watertech.com 

for details.

LIMITED LIFETIME WARRANTY ON CONDITIONER AND BRINE TANK — WaterTech Industries will replace or repair (at WTI option) any 

conditioner tank OR brine tank that becomes unusable because of leakage, corrosion or rupture due to manufacturers defect. All internal 

mechanical components are warranted for a period of five (5) years from date of installation.

LIMITED LIFETIME WARRANTY ON RESIN — The REIONATOR

®

 has been equipped with the highest quality water treatment media (WQA 

Gold Seal Certified to NSF Standards).  If, upon factory inspection, the resin is found to be defective, WaterTech Industries will furnish 

replacement resin.  The resin warranty does not cover resins subjected to water containing greater than 3.0-ppm of free chlorine or 

chloramines or containing greater than 1.0-ppm total Iron and/or Manganese.  Resin which has been fouled by iron, manganese, organics 

(or other contaminants not designed for treatment by the REIONATOR

®

) is not covered.

LIMITED LIFETIME WARRANTY ON CONTROL VALVE — The REIONATOR

®

 has been equipped with the highest quality water conditioning 

control valves available.  If, upon factory inspection, the control valve body or PC board is found to be defective, WaterTech Industries 

will furnish repair or replacement (at WTI option) of the control valve body and/or the PC board.  All internal mechanical components are 

warranted from manufacturers defect for a period of five (5) years from the date of installation.

EXCLUSIONS  AND  LIMITATION  OF  LIABILITY  —  WaterTech  Industries'  liability  for  special,  incidental,  or  consequential  damages  is 

expressly disclaimed. In no event shall WaterTech Industries' liability exceed the obligation of repairing or replacing any part that becomes 

defective under valid warranty coverage as described above. Cosmetic damage that does not affect the process functionality of the 

equipment is not covered. WaterTech Industries makes every effort to ensure that all illustrations and specifications are correct. However, 

these do not imply a warranty that the product is merchantable or fit for a particular purpose, or that the product may not vary from the 

illustrations and specifications.

The warranty contained herein is in lieu of all other warranties, expressed or inferred, including any implied warranty of fitness for a 

particular purpose. Labor and transportation costs incidental to the delivery or replacement of parts other than WTI factory repairs are not 

covered under this warranty. In the event of a warranty replacement or repair, WTI will cover the cost of shipping the covered components. 

This warranty expressly excludes any system which has been damaged by accident, fire, flood, Act of God, abuse, neglect, freezing, 

excessive temperature (below 40° F or above 110° F.), inappropriate pressure (below 20 psi or above 100 psi), misuse, alteration of product 

in  any  way  by  owner  or  installing  company,  product  identification  tampering,  misapplication,  installation  or  operation  not  consistent 

with WTI instructions and installation outside of applicable plumbing codes and local regulations.  Furthermore, this warranty expressly 

excludes any system which has been out of service for more than 90 days continuously.  Fulfillment of the warranty coverage by WTI is 

contingent on proper execution of the procedures set forth in the WTI Warranty RGA policy.  No person or representative is authorized to 

assume for WaterTech Industries any liability on its behalf, or in its name, except to refer the purchaser to this warranty.  This warranty 

gives you specific legal rights, you may also have other rights which vary from state to state.

WHAT MUST YOU DO TO OBTAIN WARRANTY SERVICE — The warranty registration (via website or phone) must be completed within 

ninety (90) days of installation to validate the REIONATOR

®

 Limited Lifetime Warranty. Units that have not been registered will be covered 

under the Standard 5/10 Product Warranty rather than the Limited Lifetime Warranty. Repair work should be performed by an authorized 

WaterTech Dealer. In the event that authorized dealer service is not available, defective components may be returned directly to WaterTech 

Industries for warranty service. The registered owner must contact WaterTech for return instructions and return the defective component, 

freight prepaid, with proof-of-purchase, within the applicable warranty period.

Warranty 17-01-020

PRODUCT MUST BE REGISTERED TO ACTIVATE WARRANTY 

VISIT WWW.WATERTECH.COM OR CALL 888-254-8412

16-02-011   04-20-2016

2460 McIver Ln, Ste. 200, Carrollton, TX 75006

Summary of Contents for RC32-TM





















Reviews: