Set Time of Day / Power Loss
The user can also set the time of day. Time of day should only need to be set after extended power
outages or when daylight saving time begins or ends. If a power outage lasting longer than two hours
occurs, the time of day will flash on and off which indicates the time of day should be reset. All other
inputs will be retained by the system and will not need to be reprogrammed.
STEP 1
Press SET CLOCK.
STEP 2
Current Time (hour): Set the hour of the day using the
5
or
6
buttons. AM/PM toggles after 12. Press NEXT to go to step 3.
STEP 3
Current Time (minutes): Set the minutes of the day using the
5
or
6
buttons. Press NEXT to exit Set Clock. Press REGEN
to return to previous step.
ERROR MESSAGE
If the word “ERROR” and a number are alternately flashing
on the display, contact an authorized WaterTech dealer for
service help. This indicates that the valve was not able to
function properly. This is a rarely encountered malfunction.
11
