background image

30119-41      Rev. 1.6/02-07

2

WARRANTY

This Warranty shall apply to and be limited to the original purchaser consumer of any McCrometer

product. Meters or instruments defective because of faulty material or workmanship will be

repaired or replaced, at the option of McCrometer, free of charge, FOB the factory in Hemet,

California, within a period of one (1) year from the date of delivery.
Repairs or modifications by others than McCrometer or their authorized representatives shall

render this Warranty null and void in the event that factory examination reveals that such repair

or modification was detrimental to the meter or instrument.  Any deviations from the factory

calibration require notification in writing to McCrometer of such recalibrations or this Warranty

shall be voided.
In case of a claim under this Warranty, the claimant is instructed to contact McCrometer, 3255

W. Stetson Ave., Hemet, California 92545, and to provide an identification or description of the

meter or instrument, the date of delivery, and the nature of the problem.
The Warranty provided above is the only Warranty made by McCrometer with respect to its

products or any parts thereof and is made expressly in lieu of any other warranties, by course of

dealing, usages of trade or otherwise, expressed or implied, including but not limited to any

implied warranties of fitness for any particular purpose or of merchantability under the uniform

commercial code.  It is agreed this Warranty is in lieu of and buyer hereby waives all other warran-

ties, guarantees or liabilities arising by law or otherwise.  Seller shall not incur any other obliga-

tions or liabilities or be liable to buyer, or any customer of buyer for any anticipated or lost profits,

incidental or consequential damages, or any other losses or expenses incurred by reason of the

purchase, installation, repair, use or misuse by buyer or third parties of its products (including any

parts repaired or replaced); and seller does not authorize any person to assume for seller any other

liability in connection with the products or parts thereof.  This Warranty cannot be extended,

altered or varied except by a written instrument signed by seller and buyer.
This Warranty gives you specific legal rights, and you may also have other rights which vary from

state to state.
McCrometer reserves the right to make improvements and repairs on product components which

are beyond the Warranty period at the manufacturer’s option and expense, without obligation to

renew the expired Warranty on the components or on the entire unit. Due to the rapid advance-

ment of meter design technology, McCrometer reserves the right to make improvements in design

and material without prior notice to the trade.
All sales and all agreements in relation to sales shall be deemed made at the manufacturer’s place

of business in Hemet, California and any dispute arising from any sale or agreement shall be

interpreted under the laws of the State of California.

Copyright © 2005 McCrometer.  All written material should not be changed or altered without permission of McCrometer.
The published technical data and instructions is subject to change 

without notice

. Contact your McCrometer representative for current technical data and instructions.

Summary of Contents for TR28-2














Reviews: