Page 10
WS2H and WS3 Manual
PROGRAMMING QUICK REFERENCE
Recommended System Setup Sequence
1. Connect all wiring and communication cables.
2. Apply power.
3. Select System Setup from the Main Setup Menu.
4. Select the correct language to use in System Setup 1.
5. Select the correct unit of measurement in System Setup 2.
6. Select the correct number of units in System Setup 3.
a. Setting this value assigns master status to that unit
b. The master unit will establish communication with the remaining units and
transfer the remaining settings to them.
7. Step through the remainder of the System Setup screens and set appropriately.
8. Select Installer Setup from the Main Setup Menu and set the installer settings
appropriately.
9. Select Cycle Setup from the Main Setup Menu and set the regenerations cycles
appropriately.
10. If using the relay board, select Expansion Setup from the Main Setup Menu and
set the relays as needed.
WS2 Programming Screen Quick Reference
1. Individual screen descriptions and settings are detailed on the following pages.
2. Some screens have been omitted for clarity.
GRAINS
x1000
Summary of Contents for WS2H
Page 2: ...Page 2 WS2H and WS3 Manual...
