Water Specialist WS1HR, Instruction Manual

Page: 16 / 59

Page 16 WS1HR & WS1.25HR Manual
STEP 4CS
STEP 5CS
STEP 6CS
Step 4CS – Press the
▼
or
▲
buttons until BACKWASH appears. Press NEXT to go to Step 5CS.
Press REGEN to return to previous step.
RETURN TO NORMAL MODE
STEP 7CS
STEP 8CS
Step 5CS - Press the
▼
or
▲
buttons until dn BRINE appears. Prior to selecting dn BRINE or UP
BRINE or not selecting a regenerant fl ow cycle, verify the correct valve body, main piston, regenerant
piston and stack are being used, and that the injector or injector plug(s) are in the correct locations. See
Compliance Table in Service Instructions under Injector Cap, Screen, Injector Plug and Injector section
and Figure 6. Press NEXT to go to Step 6CS. Press REGEN to return to previous step.
Step 6CS - Press the
▼
or
▲
buttons until RINSE appears. Press NEXT to go to Step 7CS. Press
REGEN to return to previous step.
Step 7CS - Press the
▼
or
▲
buttons until FILL appears. Press NEXT to go to Step 8CS. Press
REGEN to return to previous step.
Step 8CS - Press the
▼
or
▲
buttons until END appears. Press NEXT to exit OEM Cycle Sequence.
Press REGEN to return to previous step.