Water Specialist WS1.25CC, Operation And Instruction Manual

Page: 22 / 60

Page 22 WS1CC & WS1.25CC Manual
User Display Settings
General Operation
When the system is operating, one of fi ve displays may be
shown. Pressing NEXT will alternate between the displays.
One of the displays is always the current time of day. The
second display is one of the following: days remaining or
volume remaining. Days remaining is the number of days left
before the system goes through a regeneration cycle. Capacity
remaining is the gallons that will be treated before the system
goes through a regeneration cycle. The third display shows the
current treated water fl ow rate through the system. The fourth
display will show either dP or hold if the dP switch is closed.
The fi fth display shows the pounds of salt remaining or fl ashes
“SALT” fi ll when the calculated pounds of salt falls below a
safety level. The fi fth display will not appear if the valve is set
up as a fi lter or if the Set Low Salt Warning is set to off (see
last step in OEM Softener System Setup). The user can scroll
between the displays as desired.
If the system has called for a regeneration that will occur at the
preset time of regeneration, the words REGEN TODAY will
appear on the display.
If a water meter is installed, the word “Softening” or
“Filtering” fl ashes on the display when water is being treated
(i.e. water is fl owing through the system).
➟
➟
➟
or
➟
➟
REGEN TODAY will
Flash if a regeneration
is expected “Tonight.”
➟
➟
or
➟➟
➟