WatchGuard Firebox T35-R Hardware Guide
Turn off electrical power until the adapter and earth ground are connected, and you are
ready to turn on the Firebox.
To attach the Direct DC Terminal Adapter to the Firebox:
1.
Connect
a
3.2
mm
stranded
copper
ground
wire
to
the
ground
terminal
on
the
Firebox.
Connect
the
other
end
of
the
ground
wire
to
the
earth
ground.
2.
Insert
the
adapter
into
the
DC
port
of
the
Firebox.
3.
Tighten
the
retention
screw.
4.
Connect
the
positive
wire
to
the
side
of
the
adapter
indicated
by
a
+
symbol,
then
connect
the
negative
wire
to
the
side
of
the
adapter
indicated
by
a
—
symbol.
5.
Turn
on
the
Firebox.
Connect Firebox Cables
Connect the Ethernet cables to complete the setup with WatchGuard System Manager or the Fireware Web
UI:
1. Use an Ethernet cable to connect interface 1 of the Firebox to your computer.
2. Use an Ethernet cable to connect interface 0 to a router or network that provides Internet access.
See
for further instructions on how to complete your Firebox deployment.
DIN Rail Mounting Plate
The DIN rail mounting plate enables you to mount the Firebox on a wall in a good location to increase the
wireless range. You can attach the mounting plate to the sides or bottom of the Firebox.
To install the mounting plate:
1. Securely screw the mounting plate to the Firebox with the included screws.
2. Clip the mounting plate onto the DIN rail.
WatchGuard Technologies, Inc.
5
