background image

174

WatchGuard Firebox SOHO 6 Wireless

that the cable is connected and the computer or hub is connected to 
a power supply.

I can connect to the Configuration Settings page; why can’t 

I browse the Internet?

If you can connect to the configuration page, but not the Internet, 
there is a problem with the connection from the SOHO 6 Wireless 
to the Internet.

• Make sure the cable modem or DSL modem is connected to 

the SOHO 6 Wireless and the power supply.

• Make sure the link light on the modem and the WAN 

indicator on the SOHO 6 Wireless are lit.

Speak with your ISP if the problem is not corrected.

How can I see the MAC address of my SOHO 6 Wireless?

1

Type the IP address of the trusted network in your browser 
window to connect to the System Status page of the SOHO 6 
Wireless:

The default IP address is: http://192.168.111.1

2

At the bottom of the System Status page, the External network 
header is shown on the right side.  The MAC address or 
addresses are shown.

Record these addresses before you call Technical Support.

What is the default trusted IP address?

The default trusted IP address is either 192.168.111.1 for a wired 
computer and 192.168.112.1 for a wireless computer.

Summary of Contents for Firebox SOHO 6 Wireless

















































































































































































































Reviews: