CHAPTER 2: Preparation, Installation, and Connection
14
MUVPN Client
13 Under the “WINS addresses, in order of use” heading, click the
Add
button.
The TCP/IP WINS Server window appears.
14 Enter your WINS server IP address in the appropriate field, then click
the
Add
button.
If you have multiple remote DNS servers repeat the last two steps.
15 Click the
OK
button to close the Advanced TCP/IP Settings window.
16 Click the
OK
button to close the Internet Protocol (TCP/IP) Properties
window.
17 Click the
OK
button to close the next window.
18 Click the
Cancel
button again to close the Dial-up connection
window.
Windows XP operating system setup
The following networking components
must
be installed and configured
on a remote computer running Windows XP in order for the MUVPN
client to function properly.
From the Windows desktop:
1
Select
Start
=>
Control Panel
=>
Network Connections
, then select the
connection you use to access the Internet.
The connection window appears.
2
Click the
Properties
button.
3
Select the
Networking
tab.
4
Verify that the following components are present and enabled:
- Internet Protocol (TCP/IP)
- File and Printer Sharing for Microsoft Networks
- Client for Microsoft Networks
Install these components if they are not already present.
Installing the Internet Protocol (TCP/IP) Network Component
From the Windows desktop:
1
Select
Start
=>
Control
=>
Network Connections
, then select the
connection you use to access the Internet.
The connection window appears.