5
Quick Start up Guide
•
Make sure your TV/Monitor is ON and set to the appropriate AV channel if required
•
The Power LED will illuminate Green. It takes approximately 10 to 15 seconds to boot the
system.
•
The images from all cameras should now be displayed on your TV/Monitor
•
BEFORE BEGINNING TO RECORD YOU MUST
SET
the
DATE
and
TIME
on your DVR.
Setting the Date and Time
•
Press “MENU” on the DVR front panel to bring up the dialogue box. Use the mouse or remote to
enter the DVR login, with the on-screen keypad.
The default Device ID is 000000, the default password is to be left blank.
(Users can alter the password later. Please refer to the Advanced set up guide CD)
•
Press “MENU” on the DVR front panel to bring up the main menu. Select “SETUP”
“TIME
SETUP” to set the date and time
IMPORTANT NOTE
: Please DO NOT change the date or time on your DVR after the recording function is
activated. The recorded data will be disordered and you will not be able to find the recorded file to backup by time
search.
NOTE: If users change the date or time accidentally when the recording function is activated, it’s recommended to
clear all HDD data, and start recording again.
