Configuration Mode Menu
In Config Mode the user can do calibrations and chan-
ge various operating parameters:
•
AIR, SPAN:
Zero or Span calibration,
•
BUMP:
Bump test
•
SET HIGH\LOW\STEL\TWA
alarm limits
•
SET CAL:
Change span value
•
CAL INTV, BUMP INTV
span or bump interval
•
SET UNIT:
Change concentration unit
•
VIB SET:
Vibrator enable/disable
•
P-ON ZERO SET:
Power on zero enable/disable
•
FAST SET:
Fast power on enable/disable
•
RST CF9:
Reset configuration to default values
•
EXIT:
Exit Config Mode
In Config Mode, in general, use the Left Key to incre-
ase a number or confirm, and use the Right Key to
move the cursor or move to the next programming
item.
Exit Config Mode
Scroll to “EXIT?” and press the Left Key to exit Config
Mode and return to Normal Mode.
Daily Self-Test
Press the Left Key to confirm that the LEDs flash, the
buzzer beeps and the unit vibrates if programmed to
do so.
