7
careful NOT to rotate the Sensor Unit or loosen the nut as-
sembly from the antenna mount/extension tube. Double
check to be sure the alignment tabs are still facing forward.
Alignment
Please note that for clarity the above diagram shows the sensor
alignment tabs and the cable exit both facing forward, it is un-
common for the cable to run forward from the sensor. It would
usually run to the rear or one of the sides, and the cable exit
should be aligned accordingly. The sensor itself must face for-
Temporary Mount
For temporary mounting of the Sprayer Station, slip the cable
through an open door or window. Caution: do not damage the
cable when closing the door or window. For doors, avoid the
area near the hinges as well as near the latch. Both areas exert
extremely high forces on the cable.
