WATANABE WPMZ-5, Quick Instruction Manual, Page: 5 / 12

MODEL WPMZ-5-□□□-□□-□□□ 5/12
IM-0834-03
2nd layer
Small categories
3rd layer (setting items) 4th layer (setting contents)
Remarks
name of item
Character strings on
display
(abbreviated form)
Initial values Settable variables
1.Input
External
Control Function of external
control terminal 1 to 5
ExtCtrl1Func
ExtCtrl2Func
ExtCtrl3Func
ExtCtrl4Func
ExtCtrl5Func
None
None/ CompareReset/ MeasureBlockA/
MeasureBlockB/ MeasureBlockA&B/
DispHoldA&B/ DispHoldA/ DispHoldB/
MaxHoldA/ MaxHoldB/ MaxHoldA&B/ MinHoldA/
MinHoldB/ MinHoldA&B/PatternChange1/
PatternChange2/ PatternChange3/
MonitorChange/ TrendHold
Select functions assigned to external control
terminals.
2.Output
Comparative
Output AL1
Comparative
Output AL2
Comparative
Output AL3
Comparative
Output AL4
Pattern select PatternSelect
Pattern1(or pattern No.
in use) Pattern1/ Pattern 2/ Pattern 3/ Pattern 4/ Pattern
5/ Pattern 6/ Pattern 7/ Pattern 8 Select pattern No. to set.
Source output display
value
OutputDispValue None None/InsA/InsB/InsCalc Select source output display value to compare.
Compare mode CompareMode LevelJudge LevelJudge/ ZoneJudge Select compare mode
Condition of ON OnConditions
Excess Excess/LessThan In level judge mode
InTheZone InTheZone/OutsideTheZone In Zone judge mode
Comparison
judgement value
Threshold
10000
0 Threshold
：
±999999
Hysteresis
：
0 to 999999
In level judge mode
0
10000
0
Zone lower limit
：
±999999
Zone upper limit
：
±999999
Hysteresis
：
0 to 999999
In Zone judge mode
Comparison ON delay OnDelay None
None/20ms/50ms/100ms/200ms/500ms
1s/5s/10s/20s
Comparative output turns ON, if ON condition
continues over set delay time.
Comparison OFF
delay
OffDelay None
Comparative output turns OFF, if OFF condition
continues over set delay time.
Output mode OutputMode Normal
Normal/Latch/OneShot5ms/ OneShot 10ms/
OneShot 20ms/OneShot 50ms/ OneShot 0.1s/
OneShot 0.2s/ OneShot 0.5s/ OneShot 1s/
OneShot 2s
Select output mode of comparison
Output logic OutputLogic Negative(NO) Positive(NC)/Negative(NO) NC/NO are for relay output product.
Background Color at
ON
OnBgColors Black Black/Red/Yellow/Green
Background color priority
AL1>AL2>AL3>AL4
Analog Output
Pattern select PatternSelect
Pattern1(or pattern No.
in use) Pattern1/ Pattern 2/ Pattern 3/ Pattern 4/ Pattern
5/ Pattern 6/ Pattern 7/ Pattern 8 Select pattern No. to set.
Output range OutputRange 0-10V 0-10V/±10V/1-5V/0-20mA/4-20mA Select output range (type).
Source output display
value
OutputDispValue None None/InsA/InsB/InsCalc Select a displayable item for analog output
Output scale OutputScale
0
10000 0% display value
：
±999999
100% display value
：
±999999
Set scaling for analog output.
Set expected display values at 0% and 100% output.
BCD Output
Pattern select PatternSelect
Pattern1(or pattern No.
in use) Pattern1/ Pattern 2/ Pattern 3/ Pattern 4/ Pattern
5/ Pattern 6/ Pattern 7/ Pattern 8
Select pattern No. to set.
Source output display
value
OutputDispValue None None/InsA/InsB/InsCalc Select a displayable item for BCD output
Data signal logic DataSignalLogic Negative Positive /Negative Select logic of data signal output.
Synchronous signal
logic
SyncSignalLogic Negative Positive /Negative Select logic of synchronous signal (PC) output.
RS-485
Modbus
communication
SlaveAddress SlaveAddress 1 1/2/3/4/
･････
/30/31 Set ID number.
Baudrate Baudrate 19200bps 9600bps/19200bps/38400bps Set baud rate.
Parity Parity Even None/Even/Odd Set parity bit.
RS-232C
commu
nication
Protocol Protocol Modbus-RTU Modbus-RTU/OriginalCommand/OriginalOutput Set protocol
Baud rate Baudrate 19200bps 9600bps/19200bps/38400bps Set baudrate.
Data length DataLength 8bit 7bit/8bit Set data character length
Parity Parity None None/Even/Odd Set parity bit.
Stop bit Stopbit 1bit 1bit/2bit Set stop bit length.
Delimiter Delimiter CR CR/CR LF Set delimiter type.
3.Display
Display Select
Measure select MeasureSelect
1input:
InsA
2inputs
：
InsA+ InsB
InsA/InsB/InsCalc/ InsA+InsB / A+B/
InsA+Comp/InsB+Comp/Comp
Select displayable items can be switched by DISP
key or external control (multiple selects are
available)
Level select LevelSelect
InsA/InsB/InsCalc/ InsA+InsB
Select an item displayed on level display
Trend select TrendSelect Select an item displayed on trend display.
Level Display
Pattern select PatternSelect
Pattern1(or pattern No.
in use) Pattern1/ Pattern 2/ Pattern 3/ Pattern 4/ Pattern
5/ Pattern 6/ Pattern 7/ Pattern 8 Select pattern No. to set.
Instantaneous value A
scale
InsA Scale
0
10000 Lower limit
：
±999999
Upper limit
：
±999999
Set display scale of level display.
Left edge of display is lower limit and right edge of
display is higher limit
Instantaneous value B
scale
InsB Scalse
Instantaneous
calculation scale
InsCalcScale
Trend Display
Pattern select PatternSelect
Pattern1(or pattern No.
in use) Pattern1/ Pattern 2/ Pattern 3/ Pattern 4/ Pattern
5/ Pattern 6/ Pattern 7/ Pattern 8 Select pattern No. to set.
Instantaneous value A
scale
InsA Scale
0
10000 Lower limit
：
±999999
Upper limit
：
±999999
Set display scale of trend display.
Bottom edge of display is lower limit and top edge of
display is higher limit.
Instantaneous value B
scale
InsB Scale
Instantaneous
calculation scale
InsCalcScale
Time axis TimeAxis 1s/div
1s/div,2s/div,5s/div,10s/div,30s/div,60s/div
120s/div
Select time for 1 division of time axis.
4.System
General
Brightness Brightness 5 Bright 5 Bright/4/3/2/1 Dark/0 Off
Select brightness of display
*”0 Off” is set, whole display is black out
Power on delay PowerOnDelay None None/2Sec/5Sec/10Sec/20Sec/30Sec/60Sec Select time from power on to starting measurement
Power saving time PowerSavingTime None None/1min/2 min/5 min/10 min/30 min/60 min
In power saving state, brightness becomes “1 Dark”
level.
Language Language
日本語 日本語
/English Select language
Direction of display DisplayDirection Horizontal Horizontal/Vertical Select direction of display
Setting protect SettingProtect Disable Disable/Enable If Enable, changing settings are disabled.
Pattern Copy PatternCopy
Pattern5
（
source
）
PatternAll
（
destination
）
Excuse
Pattern1/2/3/4/5/6/7/8
Pattern1/2/3/4/5/6/7/8/PatternAll
Operationselect Excuse
Function of copying settings for each pattern.
Initialize
Save user defaults UserDefaultSave Message “Save current settings as user initial values?”
Initialize to user
defaults
UserDefaultLoad Message “Initialize setting values to user initial values?”
Initialize to factory
default
FactoryDefaultLoad Message “Initialize setting values to factory default?”
5.Diagnosis
Input Diagnosis
Pulse input A Pulse
input B PulseInputA
PulseInputB
－ －
Check for input signal existence.
(Displays pulse counts
）
Analog input A Analog
input B
AnalogInputA
AnalogInputB
－ －
Check for input signal existence.
(Displays level in percentage of rating.)
External control
inputs
ExternalCtrl
－ －
Check for ON/OFF state of terminals
Output Test
Comparative output
AL1 to AL4
CompareAL1
CompareAL2
CompareAL3
CompareAL4
－ －
Outputs ON level or OFF level
Analog output AnalogOutput
－ －
Outputs level of 10% steps of rating.
BCD Output(Data)
BCD Output(PC) BCD Output(Data)
BCD Output(PC)
－ －
Outputs ON level or OFF level for each bit
Modbus
Communication
RS-485
ModbusCom
－ －
Displays receive data and transmit data
RS-232C RS-232C Com － － Displays receive data and transmit data
1st layer
Large categories