7 Installation/ Start-up/ Menu Functions
Before starting the unit, connect up the following:
7.1
Water Supply
Insert the supplied feeder hose gasket in its seat.
Connect the hose to the tap.
Connect the drain hose with the help of a hose clamp to the outlet on the unit.
Make sure the hose it at a suitable height above the feeder pipe.
The minimum amount of water should be about 4,5 l/min
at a supply pressure of 1,5- max. 6 bar.
7.2
Fitting the Spray Gallows
Raise the coil until the screw fitting can be seen.
In order to avoid injury, be sure to take hold of the spacer to raise the coil.
Angle the head over the spray area and screw in the gallows.
8
Summary of Contents for Wapo-Ex 12 II
Page 1: ...Boil Out Unit Wapo Ex 12 II USER MANUAL...
Page 36: ......
