Wassermann Polyquick 160-T95, User Manual

Page: 14 / 28

The Polymerisation
Stop/Pause Break-of Pause Back Start
The process of dry pressure compaction is identical to polymerisation. But it
operates without water and is therefore merely
limited by the temperature (max. 70°C container = 80°C display).
For process-related reasons, work must be limited to a maximum of 70 °C in the
container.
Preheating temperature
(check for dry compression up to max. 70°C container = 80°C display)
Defines the target temperature once the main switch has been activated. The pre-heat
temperature also applies to waiting times and rest periods. Default: 60°C
If the programme temperature selected is higher, the temperature reverts back
to this value when the programme ends.
After defining the desired working mode , it may make sense to adjust the pre-heat
temperature of the programme temperature. This avoids long heat-up or cool-down
phases.
14
7
14
www.stomshop.pro