When removing or replacing a lid, hold the lid firmly and turn the container to
avoid twisting the hose.
•
The hoses are now filled by flushing (see 6.4 / 6.4.1). Make sure there are no air
bubbles in the dosing hose.
•
If a pump has been loaded with embedding material but you do not want to dose
immediately, seal the hose end with the rubber plug provided.
Finally
, insert the power plug into the socket, making sure that the mains and the
unit operate on the same voltage.
•
The scales should be level, clean and free of any unwanted loads.
•
When you turn on the power, autotest characters (
C1
to
C6
) appear on the display,
followed by the character or number of the program, then
0
to indicate the scales
have been tared.
•
Now you can
weigh, dose, rinse
or
program.
8 Operation
8.1
General Operating Instructions
All instructions for using the unit, whether in verbal or written form, are based on our own
experience and experimentation and can only be regarded as guidelines.
11
Summary of Contents for DSW-2
Page 1: ...Dosing Scales DSW 2 and DSW 2 4K USER MANUAL Dosing Scale DSW 2 4K...
Page 31: ...Notes 31...
Page 32: ......
