31
command, which will overwrite the setting set from the front panel.
3.1.1.5 Offset:
This option is used to fine tune media stop location. Press the
button to move the cursor
from left digit to right digit, and press the
button to set the value from “+” to “-” or “0” to “9”.
Press the
button to set the value into printer. Press
key to cancel the
setting and return to the previous menu. The default value is +000.
Note: If printing from enclosed software/driver, the software/driver will send out the
OFFSET command, which will overwrite the setting set from the front panel.
3.1.1.6 Shift X & Shift Y:
This option is used to fine tune print position. Press the
button to move the cursor from
left digit to right digit, and press the
button to set the value from “+” to “-” or “0” to “9”. Press
the
button to set the value into printer. Press
key to cancel the setting and
return to the previous menu. The default value is +000.
Note: If printing from enclosed software/driver, the software/driver will send out the SHIFT
command, which will overwrite the setting set from the front panel.
3.1.1.6 Reference X & Reference Y:
This option is used to set the origin of printer coordinate system horizontally and vertically. Press the
button to move the cursor from left digit to right digit, and press the
button to set
the value from “0” to “9”. Press the
button to set the value into printer. Press
key to cancel the setting and return to the previous menu. The default value is 000.
Note: If printing from enclosed software/driver, the software/driver will send out the
Print Setup 5/12
Direction
Print Mode
>
Offset
Offset
+000
Print Setup 7/12
Offset
Shift X
>
Shift Y
Shift Y
+000
Print Setup 9/12
Shift Y
Reference X
>
Reference Y
Reference Y
000
Summary of Contents for WPL608
Page 1: ...i Wasp 610 608 Barcode Printer User s Manual...
Page 14: ...11 Loading path for ribbon...
Page 20: ...17...