30
DIRECTION 0 DIRECTION
1
Note: If printing from enclosed software/driver, the software/driver will send out the
command, which will overwrite the setting selection made on the front panel.
3.1.1.4 Print Mode: (None/Batch Mode/Peeler Mode/Cutter Mode/Cutter Batch)
This option is used to set the print mode.
Printer default setting is Batch Mode. When enter this list,
the print mode in the right side of "
>
"
icon is the printer current setting. Press
and
to select the different print mode and press the
button to enable the setting.
Press the
key to cancel the setting and return to the previous menu.
Printer Mode
Description
None
Next label top of form is aligned to the print head burn line location.
(Tear Off Mode)
Batch Mode
Once image is printed completely, label gap/black mark will be fed to
the tear plate location for tear away.
Peeler Mode
Enable the label peel off mode.
Cutter Mode
Enable the label cutter mode.
Cutter Batch
Cut the label once at the end of the printing job.
Note: If printing from enclosed software/driver, the software/driver will send out the
Print Setup 4/12
Density
Direction
>
Print Mode
Print Mode 2/6
>
Batch Mode
Peeler Mode
Cutter Mode
Summary of Contents for WPL608
Page 1: ...i Wasp 610 608 Barcode Printer User s Manual...
Page 14: ...11 Loading path for ribbon...
Page 20: ...17...