WPA1200 Product Reference Guide
i
Laser Information
The WPA1200 series is certified in the U.S. to conform to the requirements of DHHS/CDRH 21CFR Subchapter J
and to the requirements of IEC 825-1. Class II and Class 2 products are not considered to be hazardous. The
WPA1200 series contains an internal Visible Laser Diode (VLD) The VLD emissions do not exceed the maximum
limits set forth in the above regulations. The scanner is designed so that there is no human access to harmful
laser light during normal operation, user maintenance or during prescribed service operations.
The laser safety warning label required by the DHHS/IEC for the WPA1200 series' optional laser scanner module
is located on the memory compartment cover, on the back of the unit.
Caution:
Use of controls or adjustments or performance of procedures other than those specified herein
may result in hazardous laser light. Use of optical instruments with the scanner will increase
eye hazard. Optical instruments include binoculars, microscopes and magnifying glasses. This
does not include eyeglasses worn by the user.
Notices
This unit is equipped with a battery pack and backup battery. It is possible that the WPA1200 may not power-on
due to battery discharge as a result of storage.
In the above situation, plug the WPA1200 to the USB charging cable that is with DC in port or put the unit into the
WPA1200 Cradle (with 5V/3A AC-DC adapter), and recharge the unit for 16 hours in order to fully charge its
backup battery.
The backup battery will charge from external power or the main battery (if the main battery still has enough power
to turn on). In the event the main battery is fully charged, refrain from using the WPA1200 for 16 hours in order for
the main battery to fully charge the backup battery.
Backing-up data by backup battery only without the main battery installed in battery compartment may take as
long as 2 hours. Therefore, in order to prevent data protection failure due to backup battery failure, do not leave
the WPA1200 without the rechargeable battery pack installed, or without connection to AC power for an extended
period of time.
Battery charge notice
It is important to consider the atmospheric temperature whenever you are charging the Lithium-Ion battery pack.
The process is most efficient at normal room temperature or slightly cooler. It is essential that you charge
batteries within the stated range of -5°C to 50°C. Charging batteries outside of the specified range could damage
the batteries and shorten their charging life cycle.
Storage and safety notice
Although charged Lithium-Ion batteries may be left unused for several months, their capacity may be depleted
due to build up of internal resistance. If this happens they will require recharging prior to use. Lithium-Ion batteries
may be stored at temperatures between-20°C to 60°C; however, they may be depleted more rapidly at the high
end of this range. It is recommended to store batteries within normal room temperature ranges.
