Wasp WLS9600, Product Reference Manual

Page: 195 / 306

ENTER/EXIT PROGRAMMING MODE Code 11 Set Length 1
Product Reference Guide 185
Code 11 Set Length 1
This feature specifies one of the barcode lengths for
Code 11 Length Control
. Length 1 is the
minimum label length if in Variable Length Mode, or the first fixed length if in Fixed Length
Mode. Length includes the barcode’s check and data characters. The length can be set from 2 to
50 characters.
Table 18 provides some examples for setting Length 1. See page 242 for detailed instructions on
setting this feature.
Table 18. Code 11 Length 1 Setting Examples
STEP ACTION EXAMPLES
1
Desired Setting (pad with
leading zeroes)
02 Characters 07 Characters 15 Characters 50 Characters
2 Scan ENTER/EXIT PROGRAMMING MODE
3 Scan SELECT CODE 11 LENGTH 1 SETTING
4
Scan Two Characters From
Appendix D, Keypad
‘0’ and ‘2’ ‘0’ and ‘7’ ‘1’ and ‘5’ ‘5’ AND ‘0’
5 Scan ENTER/EXIT PROGRAMMING MODE
Select Code 11 Set Length 1 Setting
Make a mistake? Scan the CANCEL barcode to abort and not
save the entry string. You can then start again at the begin-
ning.
CANCEL
DEFAULT
04 = Length 1 is 4 Characters