Wasp WLS9600, Product Reference Manual

Page: 175 / 306

ENTER/EXIT PROGRAMMING MODE China Postal Code Set Length 2
Product Reference Guide 165
China Postal Code Set Length 2
This feature specifies one of the barcode lengths for
China Postal Code Length Control
. Length 2 is
the maximum label length if in Variable Length Mode, or the second fixed length if in Fixed
Length
Mode. The length includes the barcode’s check and data characters.
The length can be set from 2 to 50 characters. A setting of 0 specifies to ignore this length (only
one fixed length).
Table 15 provides examples for setting Length 2. See page 243 for detailed instructions on
setting this feature.
Table 15. China Postal Code Length 2 Setting Examples
STEP ACTION EXAMPLES
1 Desired Setting
Ignore This
Length
4 Characters 14 Characters 50 Characters
2
Pad with leading zeroes to
yield two digits
00 04 14 50
3 Scan ENTER/EXIT PROGRAMMING MODE
4 Scan SELECT China Postal Code LENGTH 2 SETTING
5
Scan Two Characters From
Appendix D, Keypad
‘0’ and ‘0’ ‘0’ and ‘4’ ‘1’ and ‘4’ ‘5’ AND ‘0’
6 Scan ENTER/EXIT PROGRAMMING MODE
Select China Postal Code Length 2 Setting
Make a mistake? Scan the CANCEL barcode to abort and not
save the entry string. You can then start again at the begin-
ning.
CANCEL
DEFAULT
50 = Length 2 is 50 Characters